Hi-Lo Strat – Treble and Bass

Vol, Treble, Bass, 5-Way Switch & Jack
Made by real Guitar Techs in Manchester

Tiny Tone - Made in Manchester

£78.00£91.00

Strat Wiring with Bass and treble Controls

 

An intuitive new Strat® wiring Scheme designed and made by us; clear up the muddiness by turning the bass down. Turn down the biting treble by turning down the treble control. A much more logical layout for the knobs on a Strat!

 

Using top grade electronic components found in high end guitars, our Hi-Lo Strat® wiring harness uses expertly soldered vintage cloth wire to boot guaranteeing the best true-tone of your pickups

The Hi-Lo Strat® wiring harness consists of:

  • 3 x  CTS USA pots
  • Prewired Switchcraft® USA 1/4” jack socket
  • 5 way pickup selector switch
  • Strat wiring diagram to connect your pickups and jack/ground
  • Solderless installation option

We offer some tweakable options for you as well as a no-solder-installation version! Or select “stock” for the true classic circuit

Choosing Custom Pots

Functions

  • Volume
  • Master Treble
  • Master Bass Control
  • 5 Way Pickup switch
    • Neck
    • Neck and Middle
    • Middle
    • Middle and Bridge
    • Bridge

CTS USA Pots

Featuring Vintage spec CTS pots, our prewired Strat kit is the ultimate upgrade to stock electronics in any guitar. Our pots have a classic audio taper designed to give a smooth roll off without suddenly jumping in volume

Vintage Cloth Wire

Only the best #22AWG Gavitt wire is used in our circuits for true vintage tone and look

Choice of Pot Resistance

Customise your circuit, are humbuckers or singlecoils going to be used here? You can choose the resistance value of the pots we’ll use to make your harness. Helpful guide on choosing pot values

Installation

Simply screw in the prewired Strat® kit into your pickguard and reconnect your pickups, the jack socket and the ground running from the bridge or tremolo claw. Follow our easy to understand wiring diagram provided. This kit comes with a prewired jack socket and just needs attaching to the volume control.

Solderless Installation Option

When a Solderless version is bought, you have a super easy job as you only need to screw in the connections – no soldering iron required! Follow our easy to understand wiring diagram provided. This kit comes with a prewired jack socket and just needs attaching to the volume control.

Right or Left Handed

Select whether you wish to have your wiring made right or left handed, lefties turn fully anticlockwise for full volume. We’ll use a top quality C Curve CTS pot so that the volume and tones turn down evenly and smoothly

Will this fit my guitar?

This Stratocaster® wiring harness will fit any Strat style guitar. You may be required to drill the holes on your pickguard to 10mm diameter to accommodate the larger USA CTS pots. The pot body is 24mm

If installing into an imported model or Strat® copy, you may need new control knobs and switch tip to fit the US made CTS pots and Pickup Switch.

Need a loaded pickguard ? We can load in this wiring into your Custom Pickguard order no stress!

 

Why Choose Tiny Tone?

The wiring put together by Jack is none other than expert. He’s been repairing guitars as the owner of Jack’s Instrument Services, Guitar repair workshop in Manchester since 2009; modifying, restoring and upgrading all types of guitars and basses. The wiring you see for sale here is a result of years of expertise, technique, road testing and refinement. Each pickguard, pedal and wiring solution is grounded in what works in the real world using parts and skills that we proudly stand behind!

Jack Ellis @ Jack's Instrument Services, Manchester

 

Potentiometer Value

250kΩ (Classic), 500kΩ

Solderless Installation Option

Solderless Installation, Requires Soldering

Right/Left Handed option

Right-Handed, Left Handed

You may also like…